Product Description

KSD9700 series thermal protector range of applications
● Ballast
● fluorescent
● Motor
● Transformers
● laminator
● Rechargeable battery
● Solenoid
● Appliances
● PCB board

KSD9700 series thermal protector works
KSD9700 series is a double metal as the temperature sensing thermostat,Electrical work, the double-metal free state,Contact is closed / disconnected state, when the temperature rises to action temperature, the bimetallic element to heat stress and rapidly generate action Open / close contact, off / on the circuit, and thus play a role in thermal protection. When getting down to re-set temperature is the degree of contact auto open / close, return to normal working condition.

KSD9700 series thermal protector product advantages
● Small size, easy to install
● Snap-action bimetal, fast response
● life of up to 10,000 times
● anti-vacuum impregnation process
● Alternative SENSATA 17AM 7AM, South Korea, SEK ST-22 and other foreign products

KSD9700 series thermal protector Specifications
● Contact form: normally open, normally closed
● contact capacity (15A/12VDC 12A/24VDC 10A/120VAC 8A/250VAC)
● normal contact resistance ≤ 50mΩ
● Insulation resistance ≥ 100mΩ

Model	Long（MM）	Wide(MM)	High(MM)
20-Steel	20	7.4	3.8
20-Plastic	20	8.0	4.2
15-Steel	15	6.7	3.2
15-Plastic	15	7.2	3.8

Operate or reset the control table

Code	Action temperature	Reset temperature	Code	Action temperature	Reset temperature
40	40±5℃	≥30℃	105	105±5℃	70±12℃
45	45±5℃	≥30℃	110	110±5℃	75±12℃
50	50±5℃	≥30℃	115	115±5℃	80±12℃
55	55±5℃	≥30℃	120	120±5℃	85±12℃
60	60±5℃	40±10℃	125	125±5℃	90±12℃
65	65±5℃	45±10℃	130	130±5℃	95±12℃
70	70±5℃	50±10℃	135	135±5℃	100±12℃
75	75±5℃	55±10℃	140	140±5℃	105±12℃
80	80±5℃	60±10℃	145	145±5℃	110±12℃
85	85±5℃	65±10℃	150	150±5℃	115±12℃
90	90±5℃	70±10℃	155	155±5℃	120±12℃
95	95±5℃	75±10℃	160	160±5℃	125±12℃
100	100±5℃	80±10℃	Special specifications can be developed according to customer requirements

KSD9700 series thermal protector Notes
●using contact temperature-type installation,should be The product snapping charged with apparatus mounting surface.
● installation of plastic or metal can not be collapsed or distort, so as not to affect performance.
● Metal products with added insulation jacket of the installation can not be removed without the external insulating sleeve or crushed, to avoid leakage, ensure safe use.
● product is not greater than 5A current in the circuit, should be selected cross-section of 0.4-0.75 mm 2 copper wire connected to it.
● product should be less than 90% relative humidity, ambient temperature below 40 ℃ ventilation, clean, dry, non-corrosive gas in storage.

Price Terms︰ EXW

Payment Terms︰ T/T

Packing︰ paper cartons

Lead Time︰ 15days

Product Image